|
INKJET DEPOSITION SYSTEM WITH COMPUTER VISION-BASED CALIBRATION FOR TARGETING ACCURACY
Lee Weiss, Lawrence Schultz, and Eric Miller
tech. report CMU-RI-TR-06-15, Robotics Institute, Carnegie Mellon University, March, 2006
Details |
pdf (485KB) | Copyrighted
Layered Manufacturing: Current Status and Future Trends
D. Dutta, Fritz B. Prinz, D. Rosen, and Lee Weiss
Trans. ASME JCISE, Vol. 1, No. 1, 2001, pp. 60 - 71.
Details
Solid Freeform Fabrication: A New Manufacturing Paradigm
Richard H. Crawford, Joseph J. Beaman, Christopher Cavello, Jerry D. Jackson, Lee Weiss, and Carlo H. S?uin
IEEE Spectrum, Vol. 36, No. 2, 1999, pp. 34 - 43.
Details
Automated Fabrication of Complex Molded Parts Using Mold SDM
A. G. Cooper, Sing Bing Kang, J. W. Kietzman, Fritz B. Prinz, J. L. Lombardi, and Lee Weiss
Solid Freeform Fabrication Symposium, August, 1998.
Details |
pdf (205KB) | Copyrighted
Automated Fabrication of Complex Molded Parts Using Mold SDM
A. G. Cooper, Sing Bing Kang, J. W. Kietzman, Fritz B. Prinz, J. L. Lombardi, and Lee Weiss
Materials and Design, Vol. 20, No. 2/3, June, 1998, pp. 83 - 89.
Details
Fabrication of microstructures using aluminum anodization techniques
A. Nadeem, M. Mescher, Keith Rebello, Lee Weiss, C.C. Wu, M.D. Feldman, and M.L. Reed
Proceedings of The Eleventh Annual International Workshop on Micro Electro Mechanical Systems, January, 1998, pp. 274 - 277.
Details |
pdf (635KB) | Copyrighted
Shape Deposition Manufacturing with Microcasting: Processing, Thermal and Mechanical Issues
C. H. Amon, Jack L. Beuth, R. Merz, Fritz B. Prinz, and Lee Weiss
Journal of Manufacturing Science and Engineering, Vol. 120, No. 3, 1998, pp. 656 - 502.
Details
Novel Applications and Implementations of Shape Deposition Manufacturing
Lee Weiss and Fritz B. Prinz
Naval Research Reviews, Vol. 1, 1998,
Details
Shape Deposition Manufacturing With Microcasting
C. Amon, Susan Finger, R. Merz, Fritz B. Prinz, K. Schmalz, and Lee Weiss
Journal of the Japan Welding Society, Vol. 66, No. 4, June, 1997, pp. 64-69.
Details
Designing and Prototyping Interactive Fluid Dynamics
Exhibits for the Carnegie Science Center: An Undergraduate Team Project Experience
Susan Finger and C. Amon
ASEE / IEEE Frontiers in Education Conference, November, 1997, pp. 366 - 370.
Details |
pdf (623KB) | Copyrighted
Shape Deposition Manufacturing of Heterogeneous Structures
Lee Weiss, R. Merz, Fritz B. Prinz, Eugene Neplotnik, P. Padmanabhan, Lawrence Schultz, and K. Ramaswami
SME Journal of Manufacturing Systems, Vol. 16, No. 4, 1997, pp. 239-248.
Details
Process Methods
J. Beaman and Lee Weiss
Solid Freeform Fabrication: A New Direction in Manufacturing, J. Beaman, et. al, ed., Kluwer, 1997
Details
Layered Manufacturing Material Issues for SDM of Polymers and Ceramics
J.W. Kietzman, A.G. Cooper, Lee Weiss, Lawrence Schultz, J.L. Lombardi, and Fritz B. Prinz
1997.
Details
Investigation of Transport Phenomena in Microcasting Shape Deposition Manufacturing via Experiments Designed using Optimal Sampling
K. Schmaltz, Napoleon Leoni, P. Padmanabhan, C. Amon, Susan Finger, and Lee Weiss
Symposium on Manufacturing and Materials Processing, ASME-HTD, 1997, pp. 241-250.
Details
Building Parts You Could Not Build Before
Fritz B. Prinz, R. Merz, and Lee Weiss
Proceedings of the 8th International Conference on Production Engineering, 1997, pp. 40-44.
Details
Rapid Design and Manufacture of Wearable Computers
Susan Finger, M. Terk, E. Subrahmanian, C. Kasabach, Fritz B. Prinz, Daniel Siewiorek, A. Smailagic, J. Stivorek, and Lee Weiss
Communications of the ACM, Vol. 39, No. 2, February, 1996,
Details
Shape Deposition Manufacturing of Wearable Computers
Lee Weiss, Eugene Neplotnik, Fritz B. Prinz, Lawrence Schultz, P Padmanabhan, R. Krishnan, and R. Merz
Proceedings of the 1996 Solid Freeform Fabrication Symposium, 1996.
Details
Layered Manufacturing of Heterogeneous Structures
Lee Weiss, R. Merz, Fritz B. Prinz, Eugene Neplotnik, P. Padmanabhan, Lawrence Schultz, and K. Ramaswami
Journal of Manufacturing Systems, , 1996
Details
Laser Deposition of Metals for Shape Deposition Manufaturing
J.R. Fessler, R. Merz, A.H. Nickel, Fritz B. Prinz, and Lee Weiss
Proceedings of the 1996 Solid Freeform Fabrication Symposium, 1996.
Details
Integration of
Design Education, Research and Practice at Carnegie Mellon University: A Multi-disciplinary Course in Wearable Computer Design
Cristina H. Amon, Susan Finger, Daniel Siewiorek, and Asim Smailagic
Journal of Engineering
Education, , 1996 pp. 279 - 285.
Details
Processing, Thermal, and Mechanical Issues in Shape Deposition Manufacturing
Fritz B. Prinz, Lee Weiss, C. Amon, and Jack L. Beuth
Proceedings of the 1995 Solid Freeform Fabrication Symposium, August, 1995.
Details
Smart Coatings
M. Fasching, Fritz B. Prinz, and Lee Weiss
ASM Journal of Thermal Spray Technology, Vol. 4, No. 2, 1995,
Details
Arc Sprayed Steel-Faced Tooling
Lee Weiss, D. Thuel, Lawrence Schultz, and Fritz B. Prinz
ASM Journal of Thermal Spray Technology, Vol. 3, No. 3, September, 1994,
Details
A Thermal Spray Approach To Rapid Prototyping: An Extended Abstract
Lee Weiss and Fritz B. Prinz
ASM Journal of Thermal Spray Technology, Vol. 3, No. 3, September, 1994,
Details
Controlled Microstructure of Arc Sprayed Metal Shells
P.S. Fussell, H. Kirchner, Fritz B. Prinz, and Lee Weiss
ASM Journal of Thermal Spray Technology, Vol. 3, No. 2, June, 1994,
Details
Robot-Assisted Shape Deposition Manufacturing
K. Hartman, R. Krishman, R. Merz, Eugene Neplotnik, Fritz B. Prinz, Lawrence Schultz, M. Terk, and Lee Weiss
Proceedings of the 1994 IEEE International Conference on Robotics and Automation (ICRA '94), May, 1994, pp. 2890 - 2895.
Details |
pdf (603KB) | Copyrighted
Application of Thermal Spraying in Rapid Protyping and Sensor Fabrication
M.M. Fasching, Lee Weiss, and Fritz B. Prinz
Electrical and Information Engineering, Austrian Society For Electrical Engineering, , February, 1994,
Details
New technologies and applications in robotics
Takeo Kanade, M.L. Reed, and Lee Weiss
Journal A; J. A, Vol. 35, No. 4, December, 1994, pp. 3 - 10.
Details
Shape Deposition Manufacturing
R. Merz, Fritz B. Prinz, K. Ramaswami, M. Terk, and Lee Weiss
Proceedings of the 1994 Solid Freeform Fabrication Symposium, 1994.
Details
Modeling of Novel Manufacturing Processes
C. Amon, Susan Finger, Fritz B. Prinz, and Lee Weiss
Manufacturing Science and Engineering, ASME-PED, 1994, pp. 535 - 546.
Details
Planning Robotic Trajectories for Thermal Spray Shape Deposition
M.M. Fasching, Fritz B. Prinz, and Lee Weiss
ASM Journal of Thermal Spray Technology, Vol. 2, No. 1, 1993,
Details
Material Issues in Layered Forming
C. Amon, Jack L. Beuth, H. Kirchner, R. Merz, Fritz B. Prinz, K. Schmaltz, and Lee Weiss
Proceedings of the 1993 Solid Freeform Fabrication Symposium, 1993.
Details
Homogenization Design and Layered Manufacturing of a Brake Arm in Project MAXWELL
D. Dutta, N. Kikuchi, P. Papalambros, Fritz B. Prinz, and Lee Weiss
Proceedings of the 1993 Solid Freeform Fabrication Symposium, 1993.
Details
Thermal Spray Shape Deposition
Lee Weiss, Fritz B. Prinz, D. Adams, and Daniel Siewiorek
ASM Journal of Thermal Spray Technology, Vol. 1, No. 3, 1992,
Details
Solid Freeform Fabrication by Thermal Spray Shape Deposition
Lee Weiss and Fritz B. Prinz
1992.
Details
Project MAXWELL: A Methodology for Material Composition and Fabrication of Structural Components
D. Dutta, N. Kikuchi, P. Papalambros, Fritz B. Prinz, and Lee Weiss
Proceedings of the 1992 Solid Freeform Fabrication Symposium, 1992.
Details
Optimization of Robotic Trajectories For Thermal Spray Shape Deposition
M. M. Fasching, Lee Weiss, and Fritz B. Prinz
1992.
Details
Manufacturing Mechatronics Using Thermal Spray Shape Deposition
J.E. Beck, Fritz B. Prinz, Daniel Siewiorek, and Lee Weiss
Proceedings of the 1992 Solid Freeform Fabrication Symposium, 1992.
Details
Design and modeling of a micromechanical surface bonding system
H. Han, Lee Weiss, and M.L. Reed
Proceedings of the 1991 International Conference on Solid-State Sensors and Actuators, June, 1991, pp. 974 - 977.
Details |
pdf (249KB) | Copyrighted
Mating and piercing micromechanical structures for surface bonding applications
H. Han, Lee Weiss, and M.L. Reed
Proceedings of the 1991 Micro Electro Mechanical Systems (MEMS '91), An Investigation of Micro Structures, Sensors, Actuators,
Machines and Robots, February, 1991, pp. 253 - 258.
Details |
pdf (352KB) | Copyrighted
Assessment of the Strategic Benefits of Robotic Operations: A case study of a Thermal Spraying Robot
A. Kutay and Lee Weiss
Technology Management: the New International Language, October, 1991, pp. 574 - 577.
Details |
pdf (296KB) | Copyrighted
Controlling The Microstructure of Arc Sprayed Shells
P. S. Fussell, H. O. K. Kirchner, Fritz B. Prinz, and Lee Weiss
Proceedings of the 1991 Solid Freeform Fabrication Symposium, 1991.
Details
A Sprayed Steel Tool for Permanent Mold Casting of Aluminum
P.S. Fussell, K.W. Hartmann, H.O.K. Kirchner, E.P. Patrick, Fritz B. Prinz, Lawrence Schultz, L. Thuel, and Lee Weiss
1991.
Details
A Framework For Thermal Spray Shape Deposition: The MD* System
Lee Weiss, Fritz B. Prinz, and Daniel Siewiorek
Proceedings of the 1991 Solid Freeform Fabrication Symposium, 1991.
Details
A Rapid Tool Manufacturing System Based On Stereolithography and Thermal Spraying
Lee Weiss, E.L. Gursoz, Fritz B. Prinz, P.S. Fussell, S. Mahalingam, and E.P. Patrick
ASME Manufacturing Review, , March, 1990,
Details
Rapid Prototyping from 3D Scanned Data Through Automatic Surface and Solid Generation
Y. Choi, E. Levent Gursoz, Lee Weiss, and Fritz B. Prinz
1990.
Details
Geometric Modeling for Rapid Prototyping and Tool Fabrication
E. L. Gursoz, Lee Weiss, and Fritz B. Prinz
Proceedings of the 1990 Solid Freeform Fabrication Symposium, 1990.
Details
Rapid Prototyping of Tools
Lee Weiss, E. L. Gursoz, Fritz B. Prinz, S. Mahalingham, and P. S. Fussell
tech. report CMU-RI-TR-89-25, Robotics Institute, Carnegie Mellon University, October, 1989
Details |
pdf (1MB) | Copyrighted
|
