RI | Publications | The motion of a pushed, sliding workpiece

Text only version of this site

The motion of a pushed, sliding workpiece
M.A. Peshkin and A.C. Sanderson
IEEE Journal on Robotics and Automation, Vol. 4, No. 6, December, 1988, pp. 569 - 598.

Jump to: Download | Abstract | Text Reference | BibTeX Reference

Download [Help]

Adobe portable document format (pdf) [2644 KB]

Copyright notice: This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. These works may not be reposted without the explicit permission of the copyright holder.

Abstract

It occurs frequently in robotic applications that a robot manipulates a workpiece which is free to slide on a work surface. Because the pressure distribution supporting the workpiece on the work surface cannot in general be known, the motion of the workpiece cannot be calculated uniquely. The authors find the locus of centers of rotation of a workpiece for all possible pressure distributions. The results allow a quantitative understanding of open-loop robot motions which guarantee the alignment of a workpiece. Several sample problems are solved using the results, including the distance that a flat fence, or robot finger, must push a polygonal workpiece to assure that a facet of the workpiece comes into alignment with the fence

Text Reference

M.A. Peshkin and A.C. Sanderson, "The motion of a pushed, sliding workpiece," IEEE Journal on Robotics and Automation, Vol. 4, No. 6, December, 1988, pp. 569 - 598.

BibTeX Reference

@article{Peshkin_1988_4515,
   author = "M A Peshkin and Arthur C Sanderson",
   title = "The motion of a pushed, sliding workpiece",
   journal = "IEEE Journal on Robotics and Automation",
   month = "December",
   year = "1988",
   volume = "4",
   number = "6",
   pages = "569 - 598"
}