RI | Publications | Parts Orienting by Push-Aligning

Text only version of this site

Parts Orienting by Push-Aligning
S. Akella and M. Mason
1995 IEEE International Conference on Robotics and Automation, Vol. 1, May, 1995, pp. 414--420.

Jump to: Download | Abstract | Text Reference | BibTeX Reference

Download [Help]

Adobe portable document format (pdf) [138 KB]
Compressed postscript (ps.gz) [51 KB]

Copyright notice: This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. These works may not be reposted without the explicit permission of the copyright holder.

Abstract

Programmable parts orienting is an important capability for flexible automation systems. Here we study how a part grasped in an unknown orientation by a force-controlled robot can be oriented by a sequence of push-align actions against a wall followed by sensor measurements of the distance from the grasp point to the wall. This paper concentrates on three issues: planning a sequence of actions to orient a part, exploring design changes that enable the part to be oriented in fewer steps, and the effect of shape uncertainty, due to manufacturing tolerances, on part orientability.

Text Reference

S. Akella and M. Mason, "Parts Orienting by Push-Aligning," 1995 IEEE International Conference on Robotics and Automation, Vol. 1, May, 1995, pp. 414--420.

BibTeX Reference

@inproceedings{Akella_1995_1498,
   author = "Srinivas Akella and Matthew Mason",
   title = "Parts Orienting by Push-Aligning",
   booktitle = "1995 IEEE International Conference on Robotics and Automation",
   month = "May",
   year = "1995",
   volume = "1",
   pages = "414--420"
}