Graphics enhanced version of this site

Integrated MEMS in Conventional CMOS
G. Fedder
Proc. of the NSF/ASME Workshop on Tribology Issues and Opportunities in MEMS, Kluwer Academic Publishers, November, 1997.

Jump to: Download | Abstract | Notes | Text Reference | BibTeX Reference

Adobe portable document format (pdf) [249 KB]

Copyright notice: This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. These works may not be reposted without the explicit permission of the copyright holder.

This paper provides an overview of fabrication and design of CMOS-based microelectromechanical systems with emphasis on inertial sensor and data storage applications. High-aspect-ratio (4.4:1) microstructures can be fabricated using conventional CMOS processing followed by a sequence of maskless dry-etching steps. The CMOS dielectric and metallization layers, normally used for electrical interconnect, serve a dual function as a composite metal/dielectric structural material. Reactive-ion etching produces near vertical sidewalls, enabling micromechanical beam widths and gap spacings down to 1.2 microns. The process is tailored for design of lateral electrostatic actuators as well as capacitive position and motion sensors. Tight integration of the microstructures with CMOS provides an opportunity to make low-noise sensor interface circuitry, and to include the signal processing needed to manage arrayed sensor-and-actuator systems-on-a-chip. Novel actuator and sensor topologies can be designed by embedding multiple isolated conductors into the microstructures. An additional post-CMOS processing sequence produces platinum tips on the movable microstructures. These tips are being explored for use in probe-based data storage and tunneling sensor applications.

Associated lab/group: Microelectromechanical Systems Laboratory

G. Fedder, "Integrated MEMS in Conventional CMOS," Proc. of the NSF/ASME Workshop on Tribology Issues and Opportunities in MEMS, Kluwer Academic Publishers, November, 1997.

@inproceedings{Fedder_1997_1489,
   author = "Gary Fedder",
   title = "Integrated MEMS in Conventional CMOS",
   booktitle = "Proc. of the NSF/ASME Workshop on Tribology Issues and Opportunities in MEMS",
   month = "November",
   year = "1997",
   publisher = "Kluwer Academic Publishers"
}