Lorentz Magnetic Levitation for Haptic Interaction: Device Design, Performance, and Integration with Physical Simulations

Peter Berkelman and Ralph Hollis
The International Journal of Robotics Research, Vol. 19, No. 7, July, 2000, pp. 644 - 667.


Download
  • Adobe portable document format (pdf) (3MB)
Copyright notice: This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. These works may not be reposted without the explicit permission of the copyright holder.

Abstract
A new Lorentz force magnetic levitation haptic interface device has been developed and integrated with real-time 3-D rigid-body simulations for detailed, responsive interaction with dynamic virtual environments. An ideal haptic interface device would enable remote or simulated objects to be sensed and manipulated in 6 degrees of freedom (DoF) in the same manner as real physical objects, with the same micrometer level of detail and kHz bandwidth response that the user can sense. To approach this level of performance requires stiff lightweight moving parts, responsive actuators, high-resolution sensors, a fast control system, and a real-time simulation closely integrated with the device. Lorentz levitation is well suited to high-performance, tool-based haptic interaction because noncontact actuation and sensing provide motion and force feedback in 6 DoF with the simple dynamics of a single moving part at high control bandwidths and sensitivity. New actuation and sensing subsystem designs greatly increase the user range of motion over previous maglev devices. The motion range of the new device is ? 12.5 mm in translation and ?7.5 deg in rotation to accommodate haptic fingertip motion tasks. The device has a measured closed-loop position bandwidth of more than 100 Hz in each DoF, a maximum stiffness of 25.0 N/mm, and a position resolution of 5-10 ?. Virtual coupling and intermediate representation methods were implemented to combine the simulation and the device controller and maximize the realism of haptic user interaction when computational resources are limited. In our system, the device controller must cycle several times faster than the simulation to generate stiff constraints during stable levitation. With virtual coupling, the updated position and orientation data from the interface device and the simulated tool act as error and velocity feedback control setpoints for each other. With the contact point intermediate representation method, a list of current tool contact points and directions is generated at each update of the simulation so that the device controller can evalute contact constrains locally and change impedance to respond to user motions at the fast control rate rather than the slower simulation rate. The contact point intermediate representation provides a crisper, more responsive feeling than virtual coupling during interaction but is not as easily stabilized. Experimental data from the virtual coupling and a modified contact point intermediate representation are presented.

Notes
Associated Lab(s) / Group(s): Microdynamic Systems Laboratory
Associated Project(s): Magnetic Levitation Haptic Interfaces
Number of pages: 24

Text Reference
Peter Berkelman and Ralph Hollis, "Lorentz Magnetic Levitation for Haptic Interaction: Device Design, Performance, and Integration with Physical Simulations," The International Journal of Robotics Research, Vol. 19, No. 7, July, 2000, pp. 644 - 667.

BibTeX Reference
@article{Berkelman_2000_6163,
   author = "Peter Berkelman and Ralph Hollis",
   title = "Lorentz Magnetic Levitation for Haptic Interaction: Device Design, Performance, and Integration with Physical Simulations",
   journal = "The International Journal of Robotics Research",
   pages = "644 - 667",
   month = "July",
   year = "2000",
   volume = "19",
   number = "7",
}