Control of a Bow Leg Hopping Robot

Garth Zeglin and H. Benjamin Brown
Proceedings of the IEEE International Conference on Robotics and Automation, May, 1998.


Download
  • Adobe portable document format (pdf) (149KB)
Copyright notice: This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. These works may not be reposted without the explicit permission of the copyright holder.

Abstract
The bow leg hopper is a new design for a locomoting system with a resilient, flexible leg. It features a passive stance phase and natural pitch stability. It is controlled with actuators that configure the leg angle and stored leg energy during flight. During stance, the actuators are mechanically decoupled from the leg and the stored energy is released. The trajectory is determined by the spring-mass physics and the state of the leg at impact. This design casts the controller as a function mapping three trajectory parameters to two control outputs once every hopping cycle. Our particular solution uses a combination of graph-search planning and feedback control. The planner searches to find sequences of foot placements and computes control outputs using numerical solution of a physical model. Feedback control is computed once per bounce. Experimental data from a planar prototype are included demonstrating navigation of simple artificial terrain.

Keywords
legged locomotion, dynamic balance, hopping, running, control, planning

Notes
Associated Project(s): Bow Leg Hopper

Text Reference
Garth Zeglin and H. Benjamin Brown, "Control of a Bow Leg Hopping Robot," Proceedings of the IEEE International Conference on Robotics and Automation, May, 1998.

BibTeX Reference
@inproceedings{Zeglin_1998_2618,
   author = "Garth Zeglin and H. Benjamin Brown",
   title = "Control of a Bow Leg Hopping Robot",
   booktitle = "Proceedings of the IEEE International Conference on Robotics and Automation",
   address = "Leuven, Belgium",
   month = "May",
   year = "1998",
}