Accurate Alignment of Laminate Materials using Sensor-Based Robot Techniques

A. E. Brennemann, R. Hammer, Ralph Hollis, and W. V. Jecusco
IEEE Int'l Conf. on Robotics and Automation, May, 1994, pp. 2273-2278.


Download
  • Adobe portable document format (pdf) (453KB)
Copyright notice: This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. These works may not be reposted without the explicit permission of the copyright holder.

Abstract
Assembly accuracies of 0.05-0.1 mm, needed for electronic product manufacture, are attainable with current automated manufacturing equipment. Aggressive electronic system designs will require manufacturing accuracies in the range of 0.005-0.01 mm. A system and strategy is described here to fabricate circuit boards requiring alignment accuracies of 7.5 μm using existing automation equipment with enhancements and typical manufacturing line fixtures. The system, configured as a pilot workcell, consisted of an IBM 7576 coarse positioning robot, a fine positioning manipulator, an optical sensing system and a unique bracing method to reduce environmental disturbances. The strategy was to use a coarse/fine placement technique with sensing to align, stack and bond individual test laminates with patterns of 100 μm holes. The results showed that pairs of holes were consistently aligned to 2-5 μm which surpasses the 7.5 μm manufacturing requirement

Notes
Associated Lab(s) / Group(s): Microdynamic Systems Laboratory
Number of pages: 6

Text Reference
A. E. Brennemann, R. Hammer, Ralph Hollis, and W. V. Jecusco, "Accurate Alignment of Laminate Materials using Sensor-Based Robot Techniques," IEEE Int'l Conf. on Robotics and Automation, May, 1994, pp. 2273-2278.

BibTeX Reference
@inproceedings{Hollis_1994_2333,
   author = "A. E. Brennemann and R. Hammer and Ralph Hollis and W. V. Jecusco",
   title = "Accurate Alignment of Laminate Materials using Sensor-Based Robot Techniques",
   booktitle = "IEEE Int'l Conf. on Robotics and Automation",
   pages = "2273-2278",
   month = "May",
   year = "1994",
   volume = "3",
}