RI | People | Fritz B Prinz | Publications

Text only version of this site

Publications, Fritz B Prinz

Note: This list may not be comprehensive. It contains only those publications in the RI publications database. Entries are listed in reverse chronological order.

• Layered Manufacturing: Current Status and Future Trends
  D. Dutta, F.B. Prinz, D. Rosen, and L. Weiss
  Trans. ASME JCISE, Vol. 1, No. 1, 2001, pp. 60 - 71.

• Automated Fabrication of Complex Molded Parts Using Mold SDM
  A.G. Cooper, S. Kang, J.W. Kietzman, F.B. Prinz, J.L. Lombardi, and L. Weiss
  Solid Freeform Fabrication Symposium, August, 1998. [Abstract]
  Download: pdf [205 KB] copyrighted

• Automated Fabrication of Complex Molded Parts Using Mold SDM
  A.G. Cooper, S. Kang, J.W. Kietzman, F.B. Prinz, J.L. Lombardi, and L. Weiss
  Materials and Design, Vol. 20, No. 2/3, June, 1998, pp. 83 - 89.

• Shape Deposition Manufacturing of Metals: Microstructures, Interfaces, and Properties
  P.S. Fussell, J. Fessler, F.B. Prinz, and L. Weiss
  February, 1998.

• Novel Applications and Implementations of Shape Deposition Manufacturing
  L. Weiss and F.B. Prinz
  Naval Research Reviews, Vol. 1, 1998.

• Shape Deposition Manufacturing with Microcasting: Processing, Thermal and Mechanical Issues
  C.H. Amon, J.L. Beuth, R. Merz, F.B. Prinz, and L. Weiss
  Journal of Manufacturing Science and Engineering, Vol. 120, No. 3, 1998, pp. 656 - 502. [Abstract]

• Shape Deposition Manufacturing With Microcasting
  C. Amon, S. Finger, R. Merz, F.B. Prinz, K. Schmalz, and L. Weiss
  Journal of the Japan Welding Society, Vol. 66, No. 4, June, 1997, pp. 64-69.

• Building Parts You Could Not Build Before
  F.B. Prinz, R. Merz, and L. Weiss
  Proceedings of the 8th International Conference on Production Engineering, Chapman & Hall, 2-6 Boundary Row, London SE1 8HN, UK, 1997, pp. 40-44.

• Layered Manufacturing Material Issues for SDM of Polymers and Ceramics
  J.W. Kietzman, A.G. Cooper, L. Weiss, L. Schultz, J.L. Lombardi, and F.B. Prinz
  1997.

• Shape Deposition Manufacturing of Heterogeneous Structures
  L. Weiss, R. Merz, F.B. Prinz, E. Neplotnik, P. Padmanabhan, L. Schultz, and K. Ramaswami
  SME Journal of Manufacturing Systems, Vol. 16, No. 4, 1997, pp. 239-248. [Abstract]

• Rapid Design and Manufacture of Wearable Computers
  S. Finger, M. Terk, E. Subrahmanian, C. Kasabach, F.B. Prinz, D. Siewiorek, A. Smailagic, J. Stivorek, and L. Weiss
  Communications of the ACM, Vol. 39, No. 2, February, 1996.

• Laser Deposition of Metals for Shape Deposition Manufaturing
  J.R. Fessler, R. Merz, A.H. Nickel, F.B. Prinz, and L. Weiss
  Proceedings of the 1996 Solid Freeform Fabrication Symposium, 1996.

• Layered Manufacturing of Heterogeneous Structures
  L. Weiss, R. Merz, F.B. Prinz, E. Neplotnik, P. Padmanabhan, L. Schultz, and K. Ramaswami
  Journal of Manufacturing Systems, 1996. [Abstract]

• Reflections on a Concurrent Design Methodology: A Case Study in Wearable Computer Design
  S. Finger, J. Stivoric, C. Amon, L. Gursoz, F.B. Prinz, D. Siewiorek, A. Smailagic, and L. Weiss
  Computer-Aided Design, Vol. 28, No. 5, 1996.

• Shape Deposition Manufacturing of Wearable Computers
  L. Weiss, E. Neplotnik, F.B. Prinz, L. Schultz, P. Padmanabhan, R. Krishnan, and R. Merz
  Proceedings of the 1996 Solid Freeform Fabrication Symposium, 1996.

• Processing, Thermal, and Mechanical Issues in Shape Deposition Manufacturing
  F.B. Prinz, L. Weiss, C. Amon, and J.L. Beuth
  Proceedings of the 1995 Solid Freeform Fabrication Symposium, August, 1995.

• ImSelection - an approach for material selection that integrates mechanical design and life cycle environmental burdens
  R.W. Chen, D. Navin-Chandra, I. Nair, F.B. Prinz, and I.L. Wadehra
  Proceedings of the 1995 IEEE International Symposium on Electronics and the Environment, May, 1995, pp. 68 - 74. [Abstract]
  Download: pdf [550 KB] copyrighted

• Smart Coatings
  M. Fasching, F.B. Prinz, and L. Weiss
  ASM Journal of Thermal Spray Technology, Vol. 4, No. 2, 1995.

• A cost-benefit analysis model of product design for recyclability and its application
  R.W. Chen, D. Navin-Chandra, and F.B. Prinz
  IEEE Transactions on Components, Packaging, and Manufacturing Technology, Part A, Vol. 17, No. 4, December, 1994, pp. 502 - 507. [Abstract]
  Download: pdf [502 KB] copyrighted

• A Thermal Spray Approach To Rapid Prototyping: An Extended Abstract
  L. Weiss and F.B. Prinz
  ASM Journal of Thermal Spray Technology, Vol. 3, No. 3, September, 1994.

• Arc Sprayed Steel-Faced Tooling
  L. Weiss, D. Thuel, L. Schultz, and F.B. Prinz
  ASM Journal of Thermal Spray Technology, Vol. 3, No. 3, September, 1994.

• Controlled Microstructure of Arc Sprayed Metal Shells
  P.S. Fussell, H. Kirchner, F.B. Prinz, and L. Weiss
  ASM Journal of Thermal Spray Technology, Vol. 3, No. 2, June, 1994.

• Robot-Assisted Shape Deposition Manufacturing
  K. Hartman, R. Krishman, R. Merz, E. Neplotnik, F.B. Prinz, L. Schultz, M. Terk, and L. Weiss
  Proceedings of the 1994 IEEE International Conference on Robotics and Automation (ICRA '94), Vol. 4, May, 1994, pp. 2890 - 2895. [Abstract]
  Download: pdf [602 KB] copyrighted

• A systematic methodology of material selection with environmental considerations
  R.W. Chen, D. Navin-Chandra, T. Kurfess, and F.B. Prinz
  Proceedings of the 1994 IEEE International Symposium on Electronics and the Environment, April, 1994, pp. 252 - 257. [Abstract]
  Download: pdf [385 KB] copyrighted

• Application of Thermal Spraying in Rapid Protyping and Sensor Fabrication
  M.M. Fasching, L. Weiss, and F.B. Prinz
  Electrical and Information Engineering, Austrian Society For Electrical Engineering, February, 1994.

• Modeling of Novel Manufacturing Processes
  C. Amon, S. Finger, F.B. Prinz, and L. Weiss
  Manufacturing Science and Engineering, ASME-PED, Vol. 68, No. 2, 1994, pp. 535 - 546.

• Shape Deposition Manufacturing
  R. Merz, F.B. Prinz, K. Ramaswami, M. Terk, and L. Weiss
  Proceedings of the 1994 Solid Freeform Fabrication Symposium, 1994.

• Product design for recyclability: a cost benefit analysis model and its application
  R.W. Chen, D. Navin-Chandra, and F.B. Prinz
  Proceedings of the 1993 IEEE International Symposium on Electronics and the Environment, May, 1993, pp. 178 - 183. [Abstract]
  Download: pdf [481 KB] copyrighted

• Homogenization Design and Layered Manufacturing of a Brake Arm in Project MAXWELL
  D. Dutta, N. Kikuchi, P. Papalambros, F.B. Prinz, and L. Weiss
  Proceedings of the 1993 Solid Freeform Fabrication Symposium, 1993.

• Material Issues in Layered Forming
  C. Amon, J.L. Beuth, H. Kirchner, R. Merz, F.B. Prinz, K. Schmaltz, and L. Weiss
  Proceedings of the 1993 Solid Freeform Fabrication Symposium, 1993.

• Planning Robotic Trajectories for Thermal Spray Shape Deposition
  M.M. Fasching, F.B. Prinz, and L. Weiss
  ASM Journal of Thermal Spray Technology, Vol. 2, No. 1, 1993.

• Concurrent Design
  S. Finger, M.S. Fox, F.B. Prinz, and J. Rinderele
  Applied Artificial Intelligence, Vol. 6, 1992, pp. 257 - 283. [Abstract]
  Download: pdf [70 KB], ps.gz [49 KB] copyrighted

• Manufacturing Mechatronics Using Thermal Spray Shape Deposition
  J.E. Beck, F.B. Prinz, D. Siewiorek, and L. Weiss
  Proceedings of the 1992 Solid Freeform Fabrication Symposium, 1992.

• Optimization of Robotic Trajectories For Thermal Spray Shape Deposition
  M.M. Fasching, L. Weiss, and F.B. Prinz
  1992.

• Project MAXWELL: A Methodology for Material Composition and Fabrication of Structural Components
  D. Dutta, N. Kikuchi, P. Papalambros, F.B. Prinz, and L. Weiss
  Proceedings of the 1992 Solid Freeform Fabrication Symposium, 1992.

• Solid Freeform Fabrication by Thermal Spray Shape Deposition
  L. Weiss and F.B. Prinz
  1992.

• Thermal Spray Shape Deposition
  L. Weiss, F.B. Prinz, D. Adams, and D. Siewiorek
  ASM Journal of Thermal Spray Technology, Vol. 1, No. 3, 1992.

• A Framework For Thermal Spray Shape Deposition: The MD* System
  L. Weiss, F.B. Prinz, and D. Siewiorek
  Proceedings of the 1991 Solid Freeform Fabrication Symposium, 1991.

• A Sprayed Steel Tool for Permanent Mold Casting of Aluminum
  P.S. Fussell, K.W. Hartmann, H.O.K. Kirchner, E.P. Patrick, F.B. Prinz, L. Schultz, L. Thuel, and L. Weiss
  1991.

• Controlling The Microstructure of Arc Sprayed Shells
  P.S. Fussell, H.O.K. Kirchner, F.B. Prinz, and L. Weiss
  Proceedings of the 1991 Solid Freeform Fabrication Symposium, 1991.

• A Rapid Tool Manufacturing System Based On Stereolithography and Thermal Spraying
  L. Weiss, E.L. Gursoz, F.B. Prinz, P.S. Fussell, S. Mahalingam, and E.P. Patrick
  ASME Manufacturing Review, March, 1990.

• Geometric Modeling for Rapid Prototyping and Tool Fabrication
  E.L. Gursoz, L. Weiss, and F.B. Prinz
  Proceedings of the 1990 Solid Freeform Fabrication Symposium, 1990.

• Rapid Prototyping from 3D Scanned Data Through Automatic Surface and Solid Generation
  Y. Choi, E.L. Gursoz, L. Weiss, and F.B. Prinz
  1990.

• Rapid Prototyping of Tools
  L. Weiss, E.L. Gursoz, F.B. Prinz, S. Mahalingham, and P.S. Fussell
  tech. report CMU-RI-TR-89-25, Robotics Institute, Carnegie Mellon University, October, 1989.
  Download: pdf [1226 KB] copyrighted

• A Perturbation Approach to Robot Calibration
  H.O.K. Kirchner, B. Gurumoorthy, and F.B. Prinz
  tech. report CMU-RI-TR-85-09, Robotics Institute, Carnegie Mellon University, April, 1985.
  Download: pdf [814 KB] copyrighted

• Robotic Inspection by Database Matching
  H. Thorne, F.B. Prinz, and H.O.K. Kirchner
  tech. report CMU-RI-TR-85-04, Robotics Institute, Carnegie Mellon University, March, 1985.
  Download: pdf [759 KB] copyrighted

• An Algorithm for Seam Tracking Applications
  P. Khosla, C.P. Neuman, and F.B. Prinz
  tech. report CMU-RI-TR-84-06, Robotics Institute, Carnegie Mellon University, May, 1984.
  Download: pdf [1018 KB] copyrighted

• Robotic Seam Tracking
  F.B. Prinz and K.T. Gunnarsson
  tech. report CMU-RI-TR-84-10, Robotics Institute, Carnegie Mellon University, April, 1984.
  Download: pdf [565 KB] copyrighted